Listed in Category: Communication & multimedia

EIB BUS / KNX

EIB-BUS-KNX
Cable flexibleIcona Hal Free2No propagación de la llamaNo propagación del incendioNula emisión de gases corrosivos (UNE EN 50267-2-3)Baja emisión de humos opacos (UNE EN 61034)CPR_LOGO

Description

Cable with rigid copper conductors, insulated in polyethylene and with a thermoplastic polyolefin oversheath.

Application

Electrical installation cable designed to control building automation systems: building management, energy management, system timing, decentralized control of lights, heat, air conditioning, ventilation, blinds, locks, electronic signage, etc. Aligns with EIB (European Installation Bus) and KNX systems.

  • Temperature range: -15 a +70 ºC
  • Electrical resistance of the conductor at 20º C: < 36 Ω/km
  • Electrical insulation resistance at 20º C: > 1.000 MΩxKm
  • Capacitance pair to 1 KHz: 50 ± 10 pF/m
  • Characteristic impedance (Zo): 100 Ω
  • Nominal voltage A.C.: ≤ 250 V
  • Nominal voltage D.C.: ≤ 300 V
  • Test voltage: 1.000 V
Type (pairs per section) / sq.mm. Ø Ex. sq.mm.
1x2x0,50 5 ± 0,3
2x2x0,50 6,6 ± 0,3
  • Conductor: Bare copper 0,80 mm according to EN 13602
  • Insulation: Polyethylene Type HDPE according to EN-50290-2-23
  • Formation:
    • 1 Pair: Cores twisted (22 V/m) / Colour: Red-Black
    • 2 Pairs: Twisted in STAR QUAD (20 V/m) / Colour: Pair 1: Red-Black / Pair 2: White-Yellow
  • Separator: Polyester tape
  • Drain wire: Tined cooper 0,51 mm according to EN 13602
  • Shield: Aluminium/polyester tape
  • Outer Sheath: Thermoplastic polyolefin according to EN 50290-2-27

 

Drum bobina Coil rollo
Nubox nubox
DdP/DoP (Declaration of performance) CPR:

 Other denominations: